GATE Production and Industrial Engineering Syllabus and Exam Pattern 2022 | Know The Updated Details!

GATE Production and Industrial Engineering Syllabus

GATE Production and Industrial Engineering Syllabus and Exam Pattern 2022: To prepare correctly for your GATE Production and Industrial Engineering 2022 Exam, you must have latest syllabus and exam pattern.

IIT Kharagpur has already published GATE Syllabus 2022 on the official website of the exam. There will be 65 questions in the exam, out of which 55 questions will be based on the PI subject and Mathematics. The remaining 10 questions will be based on the third section, the General Aptitude section.

To know all about the GATE Production and Industrial Engineering Syllabus and Exam Pattern 2022, read the whole blog.

Table of Contents

GATE Production and Industrial Engineering Syllabus 2022

Production and Industrial Engineering is an exciting subject. The best way to master all the concepts is to understand the complete GATE Production and Industrial Engineering Syllabus thoroughly. 

The syllabus for Production and Industrial Engineering is divided into 7 broad sections. These 7 sections are Engineering Mathematics, General Engineering, Manufacturing Processes – I, Manufacturing Processes – II, Quality and Reliability, Industrial Engineering, and Operations Research & Operations Management. These broad sections further include various topics and subtopics.

In this table you will get to know about the GATE Production and Industrial Engineering Syllabus. 

Section 1: Engineering Mathematics

  • Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and Eigen vectors.
  • Calculus: Functions of single variable, Limit, continuity and differentiability, Mean value theorems, Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima, Gradient, Divergence and Curl, Vector identities, Directional derivatives; Line, Surface and Volume integrals; Stokes, Gauss and Green’s theorems.
  • Differential Equations: First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Cauchy’s and Euler’s equations, Initial and boundary value problems, Laplace transforms.
  • Complex Variables: Analytic functions, Cauchy’s integral theorem, Taylor series.
  • Probability and Statistics: Definitions of probability and sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Linear regression, Random variables, Poisson, normal, binomial and exponential distributions.
  • Numerical Methods: Numerical solutions of linear and nonlinear algebraic equations, Integration by trapezoidal and Simpson’s rules, Single and multi-step methods for differential equations.

Section 2: General Engineering

  • Engineering Materials: Structure, physical and mechanical properties, and applications of common engineering materials (metals and alloys, semiconductors, ceramics, polymers, and composites – metal, polymer and ceramic based); Iron-carbon equilibrium phase diagram; Heat treatment of metals and alloys and its influence on mechanical properties; Stress-strain behaviour of metals and alloys.
  • Applied Mechanics: Engineering mechanics – equivalent force systems, free body concepts, equations of equilibrium; Trusses; Strength of materials – stress, strain and their relationship; Failure theories; Mohr’s circle (stress); Deflection of beams, bending and shear stresses; Euler’s theory of columns; Thick and thin cylinders; Torsion.
  • Theory of Machines and Design: Analysis of planar mechanisms, cams and followers; Governors and fly wheels; Design of bolted, riveted and welded joints; Interference/shrink fit joints; Friction and lubrication; Design of shafts, keys, couplings, spur gears, belt drives, brakes and clutches; Pressure vessels.
  • Thermal and Fluids Engineering: Fluid mechanics – fluid statics, Bernoulli’s equation, flow through pipes, laminar and turbulent flows, equations of continuity and momentum, capillary action; Dimensional analysis; Thermodynamics – zeroth, first and second laws of thermodynamics, thermodynamic systems and processes, calculation of work and heat for systems and control volumes; Air standard cycles; Heat transfer – basic applications of conduction, convection and radiation.

Section 3: Manufacturing Processes I

  • Casting: Types of casting processes and applications; Sand casting: patterns – types, materials and allowances; molds and cores–materials, making, and testing; design of gating system and riser; casting techniques of cast iron, steels, and non-ferrous metals and alloys; analysis of solidification and microstructure development; Other casting techniques: Pressure die casting, Centrifugal casting, Investment casting, Shell mold casting; Casting defects and their inspection by non-destructive testing.
  • Metal Forming: Stress-strain relations in elastic and plastic deformation; von Mises and Tresca yield criteria, Concept of flow stress; Hot, warm and cold working; Bulk forming processes – forging, rolling, extrusion and wire drawing; Sheet metal working processes – blanking, punching, bending, stretch forming, spinning and deep drawing; Ideal work and slab analysis; Defects in metal working and their causes.
  • Joining of Materials: Classification of joining processes; Principles of fusion welding processes using different heat sources (flame, arc, resistance, laser, electron beam), Heat transfer and associated losses; Arc welding processes – SMAW, GMAW, GTAW, plasma arc, submerged arc welding processes; Principles of solid state welding processes – friction welding, friction stir welding, ultrasonic welding; Welding defects – causes and inspection; Principles of adhesive joining, brazing and soldering processes.
  • Powder Processing: Production of metal/ceramic powders, compaction and sintering of metals and ceramic powders, Cold and hot isostatic pressing.
  • Polymers and Composites: Polymer processing – injection, compression and blow molding, extrusion, calendaring and thermoforming; Molding of composites.

Section 4: Manufacturing Processes II

  • Machining: Orthogonal and oblique machining, Single point cutting tool and tool signature, Chip formation, cutting forces, Merchant’s analysis, Specific cutting energy and power; Machining parameters and material removal rate; tool materials, Tool wear and tool life; Thermal aspects of machining, cutting fluids, machinability; Economics of machining; Machining processes – turning, taper turning, thread cutting, drilling, boring, milling, gear cutting, thread production; Finishing processes – grinding, honing, lapping and super-finishing.
  • Machine Tools: Lathe, milling, drilling and shaping machines – construction and kinematics; Jigs and fixtures –principles, applications, and design.
  • Advanced Manufacturing: Principles and applications of USM, AJM, WJM, AWJM, EDM and Wire EDM, LBM, EBM, PAM, CHM, ECM; Effect of process parameters on material removal rate, surface roughness and power consumption; Additive manufacturing techniques.
  • Computer Integrated Manufacturing: Basic concepts of CAD and CAM, Geometric modeling, CNC; Automation in Manufacturing; Industrial Robots – configurations, drives and controls; Cellular manufacturing and FMS – Group Technology, CAPP.

Section 5: Quality and Reliability

  • Metrology and Inspection: Accuracy and precision; Types of errors; Limits, fits and tolerances; Gauge design, Interchangeability, Selective assembly; Linear, angular, and form measurements (straightness, flatness, roundness, runout and cylindricity) by mechanical and optical methods; Inspection of screw threads and gears; Surface roughness measurement by contact and non-contact methods.
  • Quality Management: Quality – concept and costs; Statistical quality control – process capability analysis, control charts for variables and attributes and acceptance sampling; Six sigma; Total quality management; Quality assurance and certification – ISO 9000, ISO14000.
  • Reliability and Maintenance: Reliability, availability and maintainability; Distribution of failure and repair times; Determination of MTBF and MTTR, Reliability models; Determination of system reliability; Preventive and predictive maintenance and replacement, Total productive maintenance.

Section 6: Industrial Engineering

  • Product Design and Development: Principles of product design, tolerance design; Quality and cost considerations; Product life cycle; Standardization, simplification, diversification; Value engineering and analysis; Concurrent engineering; Design for “X”.
  • Work System Design: Taylor’s scientific management, Gilbreths’s contributions; Productivity – concepts and measurements; Method study, Micro-motion study, Principles of motion economy; Work measurement – time study, Work sampling, Standard data, PMTS; Ergonomics; Job evaluation and merit rating.
  • Facility Design: Facility location factors and evaluation of alternate locations; Types of plant layout and their evaluation; Computer aided layout design techniques; Assembly line balancing; Materials handling systems.

Section 7: Operations Research and Operations Management

  • Operation Research: Linear programming – problem formulation, simplex method, duality and sensitivity analysis; Transportation and assignment models; Integer programming; Constrained and unconstrained nonlinear optimization; Markovian queuing models; Simulation – manufacturing applications.
  • Engineering Economy and Costing: Elementary cost accounting and methods of depreciation; Break-even analysis; Techniques for evaluation of capital investments; Financial statements; Activity based costing.
  • Production Control: Forecasting techniques – causal and time series models, moving average, exponential smoothing, trend and seasonality; Aggregate production planning; Master production scheduling; MRP, MRP-II and ERP; Routing, scheduling and priority dispatching; Push and pull production systems, concepts of Lean and JIT manufacturing systems; Logistics, distribution, and supply chain management; Inventory – functions, costs, classifications, deterministic inventory models, quantity discount; Perpetual and periodic inventory control systems.
  • Project Management: Scheduling techniques – Gantt chart, CPM, PERT and GERT.

GATE Production and Industrial Engineering Syllabus

Subject GATE Production and Industrial Engineering Syllabus
Verbal Aptitude English grammar – articles, verb-noun agreement, tenses, adjectives, conjunctions, prepositions, other parts of speech etc.; vocabulary – words, phrases, idioms; comprehension & reading; narrative sequencing.
Analytical Aptitude Logic – Induction & Deduction; analogy; number relations & reasoning.
Spatial Aptitude Shape transformation – mirroring, rotation, translation, grouping, assembling, and scaling; Paper cutting, folding & 2-D and 3-D patterns.
Numerical Aptitude Elementary statistics & probability; geometry; data and graphs (bar graph, histogram, pie chart, and other data graphs), 2- and 3- dimensional plots, maps, and tables; mensuration; numerical computation & estimation – powers, exponents, percentages, permutations & combinations, ratios, logarithms, etc.

GATE Production and Industrial Engineering Exam Pattern 2022

Here is the GATE Production and Industrial Engineering Exam Pattern in the table below.

Particulars Details
Exam Duration Three hours
Mode of examination Computer-based test
Question type Objective type and Numerical Answer Type (NAT)
Total no. of questions 65
Full marks 100
Sections Aptitude Engineering, Mathematics, Production and Industrial Engineering
Marking Scheme
  • One mark MCQs – 1/3 score will be reduced for every incorrect response.
  • Two mark MCQs – 2/3 mark will be reduced for every incorrect answer.
  • No marks will be deducted for unattempted questions
  • No negative marking for Numerical Answer Type (NAT) questions
Section  Distribution of Marks Total Marks Types of questions
General Aptitude 5 questions of 1 mark each 5 questions of 2 marks each 15 marks  MCQs
Subject Paper (PI) + Engineering Mathematics 25 questions of 1 mark each 30 questions of 2 marks each  85 marks MCQs, MSQ and NATs

Topic-wise Weightage Of GATE Production and Industrial Engineering Syllabus (PI) 2022

Topics The weightage (Marks)
Industrial Engineering 25-30
Production Engineering 30-40
General Engineering 15-20
Mathematics & Aptitude 25-30

Other Important Information for GATE Production and Industrial Engineering 2022

Click on the link to access other information & study materials related to the GATE Production and Industrial Engineering 2022.

Recommended Books Based On GATE Production and Industrial Engineering Syllabus 2022

Here check the best preparation Books based On GATE Production and Industrial Engineering Syllabus 2022.

Title of the book Name of the Author/ Publication
GATE 2020 – Guide – Production and Industrial Engineering GKP
GATE 2020 – Solved Papers – Production and Industrial Engineering GKP
CMOS Gate-Stack Scaling – Materials, Interfaces and Reliability Implications: Volume 1155 (English, Paperback, unknown) Cambridge University Press

This is the complete blog on the GATE Production and Industrial Engineering Syllabus and Exam Pattern 2022. To know more, ask in the comments.

FAQs on GATE Production and Industrial Engineering Syllabus and Exam Pattern 2022

What is the GATE Official Website?

https://gate.iitkgp.ac.in/ is the GATE Official Website.

What are the subjects in the GATE Production and Industrial Engineering Syllabus 2022? 

GATE Production and Industrial Engineering Syllabus (PI) 2022 will have questions in 3 different sections, Engineering Mathematics, General Aptitude and Core PI subjects.

Which are the topics in the core subject of GATE Production and Industrial Engineering Syllabus (PI) 2022? 

The topics in the core subject of GATE Production and Industrial Engineering Syllabus (PI) 2022 are as follows: 
General Engineering
Manufacturing Processes I
Manufacturing Processes II
Quality and Reliability
Industrial Engineering
Operations research and Operations management.

How many questions are asked in GATE Production & Industrial Engineering 2022? 

GATE Production & Industrial Engineering Question paper will have a total of 65 questions, out of which approximately 45 questions will be PI Core Subject Questions.

Which are the most important subjects in the GATE Production and Industrial Engineering Syllabus (PI) 2022? 

The topic which has the highest weightage in the GATE Production and Industrial Engineering Syllabus (PI) 2022 is Production Engineering, as questions worth 30 to 40 marks are asked on average.

What is the paper code for GATE Production & Industrial Engineering 2022?

The paper code for GATE Production & Industrial Engineering 2022 is PI. 

Which are the best GATE Books for Production & Industrial Engineering 2022?

The best GATE Books for Production & Industrial Engineering 2022 are as follows: 
GATE 2022 – Guide – Production and Industrial Engineering by GKP
GATE 2022 – Solved Papers – Production and Industrial Engineering by GKP
CMOS Gate-Stack Scaling – Materials, Interfaces and Reliability Implications: Volume 1155 (English, Paperback, unknown) by Cambridge University Press

How much time is required for the GATE Production and Industrial Engineering Syllabus 2022?

On Average, candidates take at least 6 months to complete the GATE Production and Industrial Engineering Syllabus 2022. 

Which subject can be taken along with GATE for Production & Industrial Engineering 2022?

If you have chosen PI as your first paper can either sit for XE as the second paper.

Leave a Comment