RTU B.Tech 1st And 2nd Semester Syllabus 2020-21 & Marking Scheme

RTU B.Tech 1st and 2nd Semester Syllabus 2020-21: To prepare for the RTU Engineering semester exam, you must aware of the latest RTU B.Tech 1st and 2nd Semester Syllabus and marking scheme.

In the latest RTU Syllabus, you will find the important chapters and concepts to be covered in all subjects.

To score a better mark in the exam, you should have the depth knowledge in every topic of RTU B.Tech 1st & 2nd Semester Syllabus.

Here we are providing you the complete guide on RTU B.Tech 1st and 2nd Semester Syllabus 2020-21 and Marking Scheme.

Table of Contents

RTU B.Tech 1st and 2nd Semester Syllabus 2020-21

You can start your exam preparation by creating a solid study plan and score a better mark in all subjects in the semester exam with the latest RTU B.Tech 1st and 2nd Semester Syllabus.

You should note that the syllabus for RTU B.Tech 1st and 2nd semester is the same for all branches.

You must have Mechanical books & study materials, Previous years questions paper along with the latest Mechanical Syllabus to enhance your semester exam preparation,

Before starting the complete guide on RTU B.Tech 1st and 2nd Semester Syllabus 2020-21, let’s check the highlights of RTU from the table below.

RTU Kota Highlights:

Establishment	2006
Formation	Govt. of Rajasthan
Type of University	State
Approvals	UGC
Admission through:	Merit-Based
Affiliations	AICTE
University Location	Rajasthan Technical University, Rawathbhata Road Kota-324010, Rajasthan, India.

Here you can check RTU B.Tech 1st & 2nd Semester Syllabus 2020-21.

RTU B.Tech 1st and 2nd Semester Syllabus Engineering Mathematics-I

SN	CONTENTS
1	Calculus: Improper integrals (Beta and Gamma functions) and their properties; Applications of definite integrals to evaluate surface areas and volumes of revolutions.
2	Sequences and Series: Convergence of sequence and series, tests for convergence; Power series, Taylor’s series, series for exponential, trigonometric and logarithm functions.
3	Fourier Series: Periodic functions, Fourier series, Euler’s formula, Change of intervals,Half range sine and cosine series, Parseval’s theorem.
4	Multivariable Calculus (Differentiation): Limit, continuity and partial derivatives, directional derivatives, total derivative; Tangent plane and normal line; Maxima, minima and saddle points; Method of Lagrange multipliers; Gradient, curl and divergence.
5	Multivariable Calculus (Integration): Multiple Integration: Double integrals (Cartesian), change of order of integration in double integrals, Change of variables (Cartesian to polar), Applications: areas and volumes, Centre of mass and Gravity (constant and variable densities); Triple integrals (Cartesian), Simple applications involving cubes, sphere and rectangular parallelepipeds; Scalar line integrals, vector line integrals, scalar surface integrals, vector surface integrals, Theorems of Green, Gauss and Stokes.

RTU B.Tech 1st and 2nd Semester Syllabus Engineering Physics

SN	CONTENTS
1	Wave Optics: Newton’s Rings, Michelson’s Interferometer, Fraunhofer Diffraction from a Single Slit. Diffraction grating: Construction, theory and spectrum, Resolving power and Rayleigh criterion for limit of resolution, Resolving power of diffraction grating, X-Ray diffraction and Bragg’s Law.
2	Quantum Mechanics: Introduction to quantum Mechanics, Wave-particle duality, Matter waves, Wave function and basic postulates, Time dependent and time independent Schrodinger’s Wave Equation, Physical interpretation of wave function and its properties, Applications of the Schrodinger’s Equation: Particle in one dimensional and three dimensional boxes.
3	Coherence and Optical Fibers: Spatial and temporal coherence: Coherence length; Coherence time and ‘Q’ factor for light, Visibility as a measure of Coherence and spectral purity, Optical fiber as optical wave guide, Numerical aperture; Maximum angle of acceptance and applications of optical fiber.
4	Laser: Einstein’s Theory of laser action; Einstein’s coefficients; Properties of Laser beam, Amplification of light by population inversion, Components of laser, Construction and working of He-Ne and semiconductor lasers, Applications of Lasers in Science, engineering and medicine.
5	Material Science & Semiconductor Physics: Bonding in solids: covalent and metallic bonding, Energy bands in solids: Classification of solids as Insulators, Semiconductors and Conductors, Intrinsic and extrinsic semiconductors, Fermi dirac distribution function and Fermi energy, Conductivity in semiconductors, Hall Effect: Theory, Hall Coefficient and applications.
6	Introduction to Electromagnetism: Divergence and curl of electrostatic field, Laplace’s and Poisson’s equations for electrostatic potential, Bio-Savart law, Divergence and curl of static magnetic field, Faraday’s law, Displacement current and magnetic field arising from time dependent electric field, Maxwell’s equations, Flow of energy and Poynting vector.

RTU B.Tech 1st and 2nd Semester Syllabus Engineering Chemistry

SN	CONTENTS
1	Water: Common impurities, hardness, determination of hardness by complexometric (EDTA method), Degree of hardness, Units of hardness Municipal water supply: Requisite of drinking water, Purification of water; sedimentation, filtration, disinfection, breakpoint chlorination. Boiler troubles: Scale and Sludge formation, Internal treatment methods, Priming and Foaming, Boiler corrosion and Caustic embrittlement Water softening; Lime-Soda process, Zeolite (Permutit) process, Demineralization process. Numerical problems based on Hardness, EDTA, Lime-Soda and Zeolite process.
2	Organic Fuels: Solid fuels: Coal, Classification of Coal, Proximate and Ultimate analyses of coal and its significance, Gross and Net Calorific value, Determination of Calorific value of coal by Bomb Calorimeter. Metallurgical coke, Carbonization processes; Otto-Hoffmann by- product oven method. Liquid fuels : Advantages of liquid fuels, Mining, Refining and Composition of petroleum, Cracking, Synthetic petrol, Reforming, Knocking, Octane number, Anti-knocking agents, Cetane number Gaseous fuels; Advantages, manufacturing, composition and Calorific value of coal gas and oil gas, Determination of calorific value of gaseous fuels by Junker’s calorimeter Numerical problems based on determination of calorific value (bomb calorimeter/Junkers calorimeter/Dulongs formula, proximate analysis & ultimate and combustion of fuel.
3	Corrosion and its control: Definition and significance of corrosion, Mechanism of chemical (dry) and electrochemical (wet) corrosion, galvanic corrosion, concentration corrosion and pitting corrosion. Protection from corrosion; protective coatings-galvanization and tinning, cathodic protection, sacrificial anode and modifications in design.
4	Engineering Materials: Portland Cement; Definition, Manufacturing by Rotary kiln. Chemistry of setting and hardening of cement. Role of Gypsum. Glass: Definition, Manufacturing by tank furnace, significance of annealing, Types and properties of soft glass, hard glass, borosilicate glass, glass wool, safety glass Lubricants: Classification, Mechanism, Properties; Viscosity and viscosity index, flash and fire point, cloud and pour point. Emulsification and steam emulsion number.
5	Organic reaction mechanism and introduction of drugs: Organic reaction mechanism: Substitution; SN1, SN2, Elecrophilic aromatic substitution in benzene, free radical halogenations of alkanes, Elimination; elimination in alkyl halides, dehydration of alcohols, Addition: electrophilic and free radical addition in alkenes, nucleophilic addition in aldehyde and ketones, Rearrangement; Carbocation and free radical rearrangements Drugs : Introduction, Synthesis, properties and uses of Aspirin, Paracetamol

RTU B.Tech 1st and 2nd Semester Syllabus Communication Skills

SN	CONTENTS
1	Communication: Meaning, Importance and Cycle of Communication. Media and Types of Communication. Verbal and Non-Verbal Communication. Barriers to communication. Formal and Informal Channels of Communication (Corporate Communication). Divisions of Human Communication and Methods to improve Interpersonal Communication. Qualities of good communication.
2	Grammar: Passive Voice. Reported Speech. Conditional Sentences. Modal Verbs. Linking Words (Conjunctions)
3	Composition: Job Application and Curriculum-Vitae Writing. Business Letter Writing. Paragraph Writing. Report Writing.
4	Short Stories: “Luncheon” by Somerset Maugham.“How Much Land Does a Man Need?” by Count Leo Tolstoy. “The Night Train at Deoli” by Ruskin Bond.
5	Poems: “No Men are Foreign” by James Kirkup. “If” by Rudyard Kipling. “Where the Mind is without Fear” by Rabindranath Tagore.

RTU B.Tech 1st and 2nd Semester Syllabus Human Values

SN	CONTENTS
1	Course Introduction – Need, Basic Guidelines, Content and Process for Value Education Understanding the need, basic guidelines, Self Exploration – its content and process; ‘Natural Acceptance’ and Experiential Validation, Continuous Happiness and Prosperity- Human Aspirations, Right understanding, Relationship and Physical Facilities,Understanding Happiness and Prosperity correctly- A critical appraisal of the current scenario. Method to fulfill the above human aspirations: understanding and living in harmony at various levels
2	Understanding Harmony in the Human Being – Harmony in Myself Understanding human being as a co-existence of the sentient ‘I’ and the material ‘Body’ Understanding the needs of Self (‘I’) and ‘Body’ – Sukh and Suvidha Understanding the Body as an instrument of ‘I’,Understanding the characteristics and activities of ‘I’ and harmony in ‘I’ Understanding the harmony of I with the Body: Sanyam and Swasthya; correct appraisal of Physical needs, meaning of Prosperity in detail, Programs to ensure Sanyam and Swasthya.
3	Understanding Harmony in the Family and Society- Harmony in Human-Human Relationship Understanding harmony in the Family, Understanding values in human-human relationship; meaning of Nyaya and program for its fulfillment to ensure Ubhay-tripti; Trust (Vishwas) and Respect (Samman) , meaning of Vishwas; Difference between intention and competence, meaning of Samman, Difference between respect and differentiation; the other salient values in relationship, harmony in the society , Samadhan, Samridhi, Abhay, Sah-astitva as comprehensive Human Goals ,Visualizing a universal harmonious order in society- Undivided Society (AkhandSamaj), Universal Order (SarvabhaumVyawastha )- from family to world family.
4	Understanding Harmony in the Nature and Existence – Whole existence as Coexistence Understanding the harmony in the Nature. Interconnectedness and mutual fulfillment among the four orders of nature- recyclability and self-regulation in nature. Understanding Existence as Co-existence
	(Sah-astitva) of mutually interacting units in allpervasive Space. Holistic perception of harmony at all levels of existence
5	Implications of the above Holistic Understanding of Harmony on Professional Ethics. Natural acceptance of human values Definitiveness of Ethical Human Conduct. Basis for Humanistic Education, Humanistic Constitution and Humanistic Universal Order. Competence in Professional Ethics: a) Ability to utilize the professional competence for augmenting universal human order, b) Ability to identify the scope and characteristics of people-friendly and eco-friendly production systems, technologies and management models. Strategy for transition from the present state to Universal Human Order: At the level of individual: as socially and ecologically responsible engineers, technologists and managers. Case studies related to values in professional life and individual life.

RTU B.Tech 1st and 2nd Semester Syllabus Programming for Problem Solving

SN	CONTENTS
1	Fundamentals of Computer: Stored program architecture of computers, Storage device- Primary memory, and Secondary storage, Random, Direct, Sequential access methods, Concepts of High-level, Assembly and Low-level languages, Representing algorithms through flowchart and pseudo code.
2	Number system: Data representations, Concepts of radix and representation of numbers in radix r with special cases of r=2, 8, 10 and 16 with conversion from radix r1 to r2, r’s and (r-1)’s complement, Binary addition, Binary subtraction, Representation of alphabets.
3	C Programming: Problem specification, flow chart, data types, assignment statements, input output statements, developing simple C programs, If statement, for loops, while loops, do-while loops, switch statement, break statement, continue statement, development of C programs using above statements, Arrays, functions, parameter passing, recursion, Programming in C using these statements, Structures, files, pointers and multi file handling.

RTU B.Tech 1st and 2nd Semester Syllabus Basic Mechanical Engineering

SN	CONTENTS
1	Fundamentals: Introduction to mechanical engineering, concepts of thermal engineering, mechanical machine design, industrial engineering and manufacturing technology. Steam Boilers classification and types of steam boilers and steam turbines. Introduction and Classification of power plants.
2	Pumps and IC Engines: Applications and working of Reciprocating and Centrifugal pumps. Introduction, Classification of IC Engines, Main Components of IC Engines, Working of IC Engines and its components.
3	Refrigeration and Air Conditioning: Introduction, classification and types of refrigeration systems and air-conditioning. Applications of refrigeration and Air-conditioning.
4	Transmission of Power: Introduction and types of Belt and Rope Drives, Gears.
5	Primary Manufacturing Processes: Metal Casting Process: Introduction to Casting Process, Patterns, Molding, Furnaces. Metal Forming Processes: Introduction to Forging, Rolling, Extrusion, Drawing. Metal Joining Processes: Introduction to various types of Welding, Gas Cutting, Brazing, and Soldering.
6	Engineering Materials and Heat Treatment of Steel: Introduction to various engineering materials and their properties.

RTU B.Tech 1st and 2nd Semester Syllabus Basic Electrical Engineering

SN	CONTENTS
1	DC Circuits: Electrical circuit elements (R, L and C), voltage and current sources, Kirchhoff current and voltage laws, Series-Parallel circuits, Node voltage method, Mesh current method, Superposition, Thevenin’s, Norton’s and Maximum power transfer theorems.
2	AC Circuits: Representation of sinusoidal waveforms, peak and r.m.s values, phasor representation, real power, reactive power, apparent power, power factor. Analysis of single-phase AC circuits consisting of R, L, C, RL, RC and RLC combinations (series and parallel), resonance. Three phase balanced circuits, voltage and current relations in star and delta connections.
3	Transformers: Ideal and practical transformer, EMF equation, equivalent circuit, losses in transformers, regulation and efficiency.
4	Electrical Machines: Generation of rotating magnetic fields, Construction and working of a three-phase induction motor, Significance of torque-slip characteristic. Starting and speed control of induction motor, single- phase induction motor. Construction, working, torque-speed characteristic and speed control of separately excited DC motor. Construction and working of synchronous generators.
5	Power Converters: Semiconductor PN junction diode and transistor (BJT). Characteristics of SCR, power transistor and IGBT. Basic circuits of single phase rectifier with R load, Single phase Inverter, DC-DC converter.
6	Electrical Installations: Layout of LT switchgear: Switch fuse unit (SFU), MCB, ELCB, MCCB, Type of earthing. Power measurement, elementary calculations for energy consumption.

RTU B.Tech 1st and 2nd Semester Syllabus Basic Civil Engineering

SN	CONTENTS
1	Introduction to objective, scope and outcome the subject
2	Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
3	Surveying: Object, Principles & Types of Surveying; Site Plans, Plans& Maps; Scales & Unit of different Measurements. Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying,Bearings and Longitude & Latitude of a Line, Introduction to total station. Levelling: Instrument used, Object of levelling, Methods of levelling in brief, Contour maps.
4	Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light and ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation.
5	Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
6	Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle;Chemical Cycles: Carbon, Nitrogen& Phosphorus; Energy Flow in Eco-systems. Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting.
	Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery,Sanitary Land fill, On-Site Sanitation. Air& Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution, Harmful Effects of noise pollution, control of noise pollution, Global warming& Climate Change, Ozone depletion, Green House effect

RTU B.Tech 1st and 2nd Semester Syllabus Engineering Physics Lab

To determine the wave length of monochromatic light with the help of Michelson’s
To determine the wave length of sodium light by Newton’s
To determine the wave length of prominent lines of mercury by plane diffraction grating with the help of
Determination of band gap using a P-N junction
To determine the height of given object with the help of
To determine the dispersive power of material of a prism with the help of spectrometer.
To study the charge and discharge of a condenser and hence determine the same constant (both current and voltage graphs are to be
To determine the coherence length and coherence time of laser using He – Ne
To measure the numerical aperture of an optical
To study the Hall Effect and determine the Hall Voltage and Hall coefficients.

RTU B.Tech 1st and 2nd Semester Syllabus Engineering Chemistry Lab

Determination the hardness of water by EDTA method
Determination of residual chlorine in water
Determination of dissolved oxygen in water
Determination of the strength of Ferrous Ammonium sulphate solution with the help of K2Cr2O7 solution by using diphenyl amine indicator
Determination of the strength of CuSO4 solution iodometrically by using hypo solution
Determination of the strength of NaOH and Na2CO3 in a given alkali mixture
Proximate analysis of Coal
Determination of the flash & fire point and cloud & pour point of lubricating oil
Determination of the kinematic viscosity of lubricating oil by Redwood viscometer no. 1 at different temperature
Synthesis of Aspirin/ Paracetamol

RTU B.Tech 1st and 2nd Semester Syllabus Language

Phonetic Symbols and Transcriptions.
Extempore
Group Discussion.
Dialogue Writing.
Listening comprehension.

RTU B.Tech 1st and 2nd Semester Syllabus Human Values Activities

PS 1:

Introduce yourself in detail. What are the goals in your life? How do you set your goals in your life? How do you differentiate between right and wrong? What have been your salient achievements and shortcomings in your life? Observe and analyze them.

PS 2:

Now-a-days, there is a lot of talk about many technogenic maladies such as energy and material resource depletion, environmental pollution, global warming, ozone depletion, deforestation, soil degradation, etc. – all these seem to be manmade problems, threatening the survival of life Earth – What is the root cause of these maladies & what is the way out in opinion?

On the other hand, there is rapidly growing danger because of nuclear proliferation, arms race, terrorism, breakdown of relationships, generation gap, depression & suicidal attempts etc. – what do you think, is the root cause of these threats to human happiness and peace – what could be the way out in your opinion?

PS 3:

Observe that each of us has the faculty of ‘Natural Acceptance’, based on which one can verify what is right or not right for him. (As such we are not properly trained to listen to our ‘Natural Acceptance’ and may a time it is also clouded by our strong per-conditioning and sensory attractions).

Explore the following:

What is Naturally Acceptable’ to you in relationship the feeling of respect or disrespect for yourself and for others?
What is ‘naturally Acceptable’ to you – to nurture or to exploit others? Is your living in accordance with your natural acceptance or different from it?

Out of the three basic requirements for fulfillment of your aspirations – right understanding, relationship and physical facilities – observe how the problems in your family are related to each. Also observe how much time & effort you devote for each in your daily

PS 4:

list down all your important desires. Observe whether the desire is related to Self (I) or the Body. If it appears to be related to both, visualize which part of it is related to Self (I) and which part is related to Body.

PS 5:

Observe that any physical facility you use, follows the given sequence with time:

Necessary and tasteful – unnecessary but still tasteful – unnecessary and tasteless – intolerable

In contrast, observe that any feeling in you is either naturally acceptable or not acceptable at all. If not acceptable, you want it continuously and if not acceptable, you do not want it any moment!
List down all your important activities. Observe whether the activity is of ‘I’ or of

Body or with the participation of both or with the participation of both ‘I’ and Body.

Observe the activities within ‘i’. Identify the object of your attention for different moments (over a period of sy 5 to 10 minutes) and draw a line diagram connecting these points. Try observe the link between any two

PS 6:

Chalk out some programs towards ensuring your harmony with the body – in terms of nurturing, protection and right utilization of the
Find out the plants and shrubs growing in and around your campus, which can be useful in curing common

PS 7:

Form small groups in the class and make them carry out a dialogue focusing on the following eight questions related to ‘TRUST’;

1a. Do I want to make myself happy? 2a. Do I want to make the other happy?
3a. Does the other want to make himself/herself happy? 4a. Does the other want to make me happy?

What is the answer?

Intention (Natural Acceptance)

1b. Am I able to always make myself happy? 2b. Am I able to always make the other happy?

3b. Is the other able to always make himself/herself happy? What is the answer?

Let each student answer the questions for himself and everyone else. Discuss the difference between intention and competence. Observe whether you evaluate yourself and others on the basis of intention/competence.

PS 8:

Observe, on how many occasions, you are able to respect your related ones (by doing the right evaluation) and on how many occasions you are disrespecting by way of under-evaluation, over-evaluation or otherwise
Also, observe whether your feeling of respect is based on treating the other as you would treat yourself or on differentiations based on body, physical facilities or

PS 9:

Write a narration in the form of a story, poem, skit or essay to clarify a salient Human Value to the
Recollect and narrate an incident in your life where you were able to exhibit willful adherence to balues in a difficult

PS 10:

List down some common units (things) of Nature which you come across in your daily life and classify them in the four orders of Nature. Analysis and explain the aspect of mutual fulfillment of each unit with other orders.

PS 11:

Make a chart to show the whole existence as co-existence. With the help of this chart try to identify the role and the scope of some of the courses of your study. Also indicate the areas which are being either over-emphasized or ignored in the present context.

PS 12:

Identify any two important problems being faced by the society today and analyze the root cause of these problems. Can these be solved on the basic of natural acceptance of human values. If so, how should one proceed in this direction from

the present situation?

PS 13:

Suggest ways in which you can use your knowledge of Science/Technology/Management for moving towards a universal human order.
Propose a broad outline for humanistic Constitution at the level of

PS 14:

The course is going to be over now. It is time to evaluate what difference in your thinking it has made. Summarize the core massage of this course grasped by you. How has this affected you in terms of;

Thought
Behavior
Work and
Relization

What practical steps are you able to visualize for the transition of the society from its present state.

RTU B.Tech 1st and 2nd Semester Syllabus Computer Programming Lab

To learn about the C Library, Preprocessor directive, Input-output statement.
Programs to learn data type, variables, If-else statement
Programs to understand nested if-else statement and switch statement
Programs to learn iterative statements like while and do-while loops
Programs to understand for loops for iterative statements
Programs to learn about array and string operations
Programs to understand sorting and searching using array
Programs to learn functions and recursive functions
Programs to understand Structure and Union operation
Programs to learn Pointer operations
Programs to understand File handling operations
Programs to input data through Command line argument

RTU B.Tech 1st and 2nd Semester Syllabus Manufacturing Practices Workshop

Carpentry Shop
- T – Lap joint
- Bridle joint
Foundry Shop
- Mould of any pattern
- Casting of any simple pattern
Welding Shop
- Lap joint by gas welding
- Butt joint by arc welding
- Lap joint by arc welding
- Demonstration of brazing, soldering & gas cutting
Machine Shop Practice
- Job on lathe with one step turning and chamfering operations
Fitting and Sheet Metal Shop
- Finishing of two sides of a square piece by filing
- Making mechanical joint and soldering of joint on sheet metal
- To cut a square notch using hacksaw and to drill a hole and tapping

RTU B.Tech 1st and 2nd Semester Syllabus Basic Electrical Engineering Lab

Basic safety precautions. Introduction and use of measuring instruments – voltmeter, ammeter, multi-meter, oscilloscope. Real-life resistors, capacitors and inductors.
Transformers: Observation of the no-load current waveform on an oscilloscope. Loading of a transformer: measurement of primary and secondary voltages and currents, and power.
Three-phase transformers: Star and Delta connections. Voltage and Current relationships (line-line voltage, phase-to-neutral voltage, line and phase currents).Phase-shifts between the primary and secondary side.
Demonstration of cut-out sections of machines: dc machine (commutator- brush arrangement), induction machine (squirrel cage rotor), synchronous machine (field winging – slip ring arrangement) and single-phase induction machine.
Torque Speed Characteristic of separately excited dc motor.
Demonstration of (a) dc-dc converters (b) dc-ac converters – PWM waveform
(c) the use of dc-ac converter for speed control of an induction motor and (d) Components of LT switchgear.

RTU B.Tech 1st and 2nd Semester Syllabus Basic Civil Engineering Lab

Linear Measurement by Tape:
- Ranging and Fixing of Survey Station along straight line and across obstacles.
- Laying perpendicular offset along the survey line
Compass Survey: Measurement of bearing of linesusing Surveyor’s and Prismatic compass
Levelling: Using Tilting/ Dumpy/ Automatic Level
- To determine the reduced levels in closed circuit.
- To carry out profile levelling and plot longitudinal and cross sections for road by Height of Instrument and Rise & Fall Method.
To study and take measurements using various electronic surveying instruments like EDM, Total Station etc.
To determine pH, hardness and turbidity of the given sample of water. To study various water supply Fittings.
To determine the pH and total solids of the given sample of sewage. To study various Sanitary Fittings.

Computer Aided Engineering Graphics

Introduction: Principles of drawing, lines, type of lines, usage of Drawing instruments, lettering, Conic sections including parabola, hyperbola, Rectangular Hyperbola (General method only); Scales-Plain, Diagonal and Vernier Scales.

Projections of Point & Lines: Position of Point, Notation System, Systematic Approach for projections of points, front view & Top view of point, Position of straight lines, line parallel to Both the RPs, Line perpendicular to either of the RPs, Line inclined to one RP and parallel to the other, Line inclined to Both the RPs, Traces of a line (One drawing sheet, one assignment in sketch book).

Projection of Planes: Positions of planes, Terms used in projections of planes, plane parallel to RP, plane inclined to one RP and perpendicular to the other RP, plane perpendicular to Both the RPs, plane Inclined to Both the RPs, True shape of the plane, Distance of a point from plane, Angle between two planes.

Projections of Regular Solids: frustum and truncated solids, those inclined to both the Planes-Auxiliary Views.

Section of Solids: Theory of sectioning, section of prisms and cubes, section of pyramids and Tetrahedron section of Cylinders, section of cones, section of spheres (One drawing sheet, one assignment in sketch book)

Overview of Computer Graphics : Covering theory of CAD software [such as: The menu System, Toolbars (standard, Object Properties, Draw, Modify and Dimension), Drawing Area (Background, Crosshairs, Coordinate System), Dialog boxes and windows, Shortcut menus (Button Bars), Command Line (where applicable), The Status Bar, Different methods of zoom as used in CAD, Select and erase objects.: Isometric Views of lines, Planes, Simple and compound Solids.

Computer Aided Machine Drawing

Introduction: Principles of drawing, conventional representation of machine components and materials, lines, types of lines, dimensioning types, rules of dimensioning.

Conversion of pictorial views into orthographic views: (1 drawing sheet) Introduction to orthographic projection, concept of first angle and third angle projection, drawing of simple machine elements in first angle projection, missing view problems covering Principles of Orthographic Projections.

Sectional views of mechanical components: (1 drawing sheet) Introduction, cutting plane line, type of sectional views-full section, half section, partial or broken section, revolved section, removed section, offset section, sectioning conventions-spokes, web rib, shaft, pipes, different types of holes, conventions of section lines for different metals and materials.

Fasteners and other mechanical components: (Free hand sketch) Temporary and permanent fasteners, thread nomenclature and forms, thread series, designation, representation of threads, bolted joints, locking arrangement of nuts, screws, washers, foundation bolts etc., keys, types of keys, cotter and knuckle joints. Riveted joints, rivets and riveting, type of rivets, types of riveted joints etc. Bearing: Ball, roller, needle, foot step bearing. Coupling: Protected type, flange, and pin type flexible coupling. Other components: Welded joints, belts and pulleys, pipes and pipe joints, valves etc.

Overview of Computer Graphics: (2 drawing sheets) Covering theory of CAD software such as: The menu System, Toolbars (Standard, Object Properties, Draw, Modify and Dimension), Drawing Area (Background, Crosshairs, Coordinate System), Dialog boxes and windows, Shortcut menus (Button Bars), Command Line (Where applicable), The Status Bar, Different methods of zoom as used in CAD, Select and erase objects.: Isometric Views of Lines, Planes, Simple and compound Solids.

Engineering Mathematics-II

SN	CONTENTS
1	Matrices: Rank of a matrix, rank-nullity theorem; System of linear equations; Symmetric, skew-symmetric and orthogonal matrices; Eigenvalues and eigenvectors; Diagonalization of matrices; Cayley-Hamilton Theorem, and Orthogonal transformation.
2	First order ordinary differential equations: Linear and Bernoulli’s equations, Exact equations, Equations not of first degree: equations solvable for p, equations solvable for y, equations solvable for x and Clairaut’s type.
3	Ordinary differential equations of higher orders: Linear Differential Equations of Higher order with constant coefficients, Simultaneous Linear Differential Equations, Second order linear differential equations with variable coefficients: Homogenous and Exact forms, one part of CF is known, Change of dependent and independent variables, method of variation of parameters, Cauchy- Euler equation; Power series solutions including Legendre differential equation and Bessel differential equations.
4	Partial Differential Equations – First order: Order and Degree, Formation; Linear Partial differential equations of First order, Lagrange’s Form, Non Linear Partial Differential equations of first order, Charpit’s method, Standard forms.
5	Partial Differential Equations– Higher order: Classification of Second order partial differential equations, Separation of variables method to simple problems in Cartesian coordinates including two dimensional Laplace, one dimensional Heat and one dimensional Wave equations.

Download RTU B.Tech 1st and 2nd Semester Syllabus 2020-21

RTU B.Tech 1st and 2nd Semester Marking Scheme

Here you can check the latest B.Tech 1st and 2nd Semester Marking Scheme.

B.Tech 1st Semester Marking Scheme

Common to all branches of UG Engineering & Technology

SN	Categ ory	Course Code	Course Title	Hours			Marks			Cr
SN	Categ ory	Course Code	Course Title	L	T	P	IA	ETE	Total	Cr
1	BSC	1FY2-01	Engineering Mathematics-I	3	1	–	40	160	200	4
2	BSC	1FY2-02/ 1FY2-03	Engineering Physics/ Engineering Chemistry	3	1	–	40	160	200	4
3	HSMC	1FY1-04/ 1FY1-05	Communication Skills/ Human Values	2	–	–	20	80	100	2
4	ESC	1FY3-06/ 1FY3-07	Programming for Problem Solving/ Basic Mechanical Engineering	2	–	–	20	80	100	2
5	ESC	1FY3-08/ 1FY3-09	Basic Electrical Engineering/ Basic Civil Engineering	2	–	–	20	80	100	2
6	BSC	1FY2-20/ 1FY2-21	Engineering Physics Lab/ Engineering Chemistry Lab	–	–	2	30	20	50	1
7	HSMC	1FY1-22/ 1FY1-23	Language Lab/ Human Values Activities	–	–	2	30	20	50	1
8	ESC	1FY3-24/ 1FY3-25	Computer Programming Lab/ Manufacturing Practices Workshop	–	–	3	45	30	75	1.5
9	ESC	1FY3-26/ 1FY3-27	Basic Electrical Engineering Lab/ Basic Civil Engineering Lab	–	–	2	30	20	50	1
10	ESC	1FY3-28/ 1FY3-29	Computer Aided Engineering Graphics/ Computer Aided Machine Drawing	–	–	3	45	30	75	1.5
11	SODE CA	1FY8-00	25	0.5
Total									1025	20.5

B.Tech 2nd Semester Marking Scheme