RTU Syllabus Civil Engineering 4th Semester 2020 & Marking Scheme

RTU Syllabus Civil Engineering 4th SemesterRTU Syllabus Civil Engineering 4th Semester: If you are preparing for the fourth-semester exam then you must aware of the latest Civil Engineering Syllabus and marking scheme. With the latest RTU Syllabus Civil Engineering 4th Semester students get to know the important chapters and concepts to be covered in all subjects.

Based on the score in a Civil Engineering degree, you can shape your career in the proper way.

In the depth knowledge in every topic of Civil Engineering 4th Semester will also helpful to crack the various competitive exams like Gate, IES.

Here we are providing you the complete guide on RTU Syllabus Civil Engineering 4th Semester 2020 and Marking Scheme.

RTU Syllabus Civil Engineering 4th Semester 2020

RTU publishes the latest syllabus for all branches in its official Website. All semesters are important stages for every student’s life. With the latest Civil Engineering Syllabus for the 4th Semester, you can create a solid study plan and score a better mark in all subjects in semester exam.

You must have Civil 4th Semester books & study materials, Previous years questions paper along with the latest Civil 4th sem Syllabus to enhance your semester exam preparation,

Before starting the complete guide on RTU Syllabus Civil Engineering 4th Semester 2020, let’s check the highlights of RTU from the table below.

RTU Kota Highlights:

Establishment 2006
Formation Govt. of Rajasthan
Type of University State
Approvals UGC
Admission through: Merit-Based
Affiliations AICTE
University Location Rajasthan Technical University,
Rawathbhata Road Kota-324010, Rajasthan, India.

Check the latest syllabus for RTU Civil Engineering 4th sem from below.

Advance Engineering Mathematics-II

SN CONTENTS
1 Introduction: Objective, scope and outcome of the course.
2 Probability: Basic concepts of probability, conditional probability, Baye’s theorem.Random variable: Discrete and Continuous random variables, Joint distribution, Marginal distribution, Probability distribution function, Conditional distribution.Mathematical Expectations: Moments, Moment Generating Functions, variance and correlation coefficients, Chebyshev’s Inequality, Skewness and Kurtosis. Binomial, Poisson and Normal distribution and their properties.
3 Applied Statistics: Basic concept of variance, Correlation and regression – Rank correlation. Curve fitting by the method of least squares- fitting of straight lines, second degree parabolas and more general curves. Test of significance: Large sample test for single proportion, difference of proportions, single mean, difference of means, and difference of standard deviations.

Managerial Economics And Financial Accounting

SN CONTENTS
1 Introduction: Objective, scope and outcome of the course.
2 Basic economic concepts- Meaning, nature and scope of economics, deductive vs inductive methods, static and dynamics, Economic problems: scarcity and choice, circular flow of economic activity, national income-concepts and measurement.
3 Demand and Supply analysis- Demand-types of demand, determinants of demand, demand function, elasticity of demand, demand forecasting –purpose, determinants and methods, Supply-determinants of supply, supply function, elasticity of supply.
4 Production and Cost analysis- Theory of production- production function, law of variable proportions, laws of returns to scale, production optimization, least cost combination of inputs, isoquants. Cost concepts-explicit and implicit cost, fixed and variable cost, opportunity cost, sunk costs, cost function, cost curves, cost and output decisions, cost estimation.
5 Market structure and pricing theory- Perfect competition, Monopoly, Monopolistic competition, Oligopoly.
6 Financial statement analysis- Balance sheet and related concepts, profit and loss statement and related concepts, financial ratio analysis, cash-flow analysis, funds- flow analysis, comparative financial statement, analysis and interpretation of financial statements, capital budgeting techniques.

Technical Communication

SN CONTENTS
1 Introduction: to objective, scope and outcome of the subject.
2 Basic Electronics: Number systems & Their conversion used in digital electronics, Demorgan’s theorem, Logic Gates, half and full adder circuits, R-S flip flop, J-K flip flop.
3 Introduction to Semiconductors, Diodes, V-I characteristics, Bipolar junction transistors (BJT) and their working, introduction to CC, CB & CE transistor configurations.
4 Instrumentation: mechanical, electrical, electronic system and their calibration, Use of automatic and digital levels, electronic theodolites, total stations; Control surveys using GNSS, Total station and traversing methods (adjustment and computations of coordinates).
5 Measurement errors: Gross error and systematic errors, absolute and relative errors, accuracy, precision, resolution and significant figures. Full-field measurements;
6 Data acquisition system and data processing: analog systems, digital systems using personal computers, dynamic measurement, numerical and graphical data processing and archiving.
7 Sensors & Transducers: various types of sensors for displacement, velocity, acceleration, pressure, loads, strains, Displacement sensors, Mass &Piezoeletric, strain gauges, Temperature sensors thermocouple, flow sensors : Ultrasonic, electromagnetic, laser and thermal
8 Sensor types characteristics: types of resolution, FOV, IFOV, PSF; Geometric and radiometric distortions, Geo-referencing, re-sampling methods; Atmospheric errors and removal; Satellite orbits and characteristics; Applications of optical and microwave remote sensing techniques in Civil Engineering.
9 Digital Image Processing: Digital image, introduction to digital image processing, pre-processing, enhancement, classification, accuracy assessment.

BASIC ELECTRONICS FOR CIVIL ENGINEERING APPLICATIONS

SN CONTENTS
1 Introduction: to objective, scope and outcome of the subject.
2 Basic Electronics: Number systems & Their conversion used in digital electronics, Demorgan’s theorem, Logic Gates, half and full adder circuits, R-S flip flop, J-K flip flop.
3 Introduction to Semiconductors, Diodes, V-I characteristics, Bipolar junction transistors (BJT) and their working, introduction to CC, CB & CE transistor configurations.
4 Instrumentation: mechanical, electrical, electronic system and their calibration, Use of automatic and digital levels, electronic theodolites, total stations; Control surveys using GNSS, Total station and traversing methods (adjustment and computations of coordinates).
5 Measurement errors: Gross error and systematic errors, absolute and relative errors, accuracy, precision, resolution and significant figures. Full-field measurements;
6 Data acquisition system and data processing: analog systems, digital systems using personal computers, dynamic measurement, numerical and graphical data processing and archiving.
7 Sensors & Transducers: various types of sensors for displacement, velocity, acceleration, pressure, loads, strains, Displacement sensors, Mass &Piezoeletric, strain gauges, Temperature sensors thermocouple, flow sensors : Ultrasonic, electromagnetic, laser and thermal
8 Sensor types characteristics: types of resolution, FOV, IFOV, PSF; Geometric and radiometric distortions, Geo-referencing, re-sampling methods; Atmospheric errors and removal; Satellite orbits and characteristics; Applications of optical and microwave remote sensing techniques in Civil Engineering.
9 Digital Image Processing: Digital image, introduction to digital image processing, pre-processing, enhancement, classification, accuracy assessment.

Strength Of Materials

SN CONTENTS
1 Introduction: to objective, scope and outcome of the subject
2 Simple Stresses and Strains in different members: Stresses in prismatic & non prismatic members and in composite members; Thermal stresses; Stresses in composite members, Compatibility condition.
3 Compound Stress: Two dimensional stress system: stress resultant, principal planes and principal stresses, state of pure shear maximum shear stress, Mohr’s circle &its application. Introduction to theories of failures.
4 Bending of Beams: Bending moment, Shear force and Axial thrust diagrams for statically determinate beams subjected to various types of loads and moments, Point of Contra-flexure, relation between load, SF and BM.
5 Theory of simple bending: Distribution of bending and shear stresses for simple and composite sections, Combined direct and bending stress,
6 Torsion: Elementary concepts of torsion, shear stress in solid and hollow circular shafts, angle of twist, power transmitted by a shaft, combined bending and torsion;
7 Columns:Short and long columns, slenderness ratio, crushing and buckling of column, short column subjected to axial and eccentric loads; Euler’s theory and its limitation, concept of effective length of columns; Rankine & Secant formulae, middle third rule, core of a section.
8 Deflection of Beams: Differential relation between load, shear force, bending moment, slope deflection. Slope & deflection in determinate beams using double integration method, Macaulay’s method, area moment method and conjugate beam method and their application to statically determinate prismatic beams.

Hydraulics Engineering

SN CONTENTS
1 Introduction: to scope, objective and outcome of subject
2 Dimensional Analysis & Models: Dynamical Similarity and Dimensional Homogeneity Model experiment, geometric, Kinematic and Dynamic similarity. Reynold’s, froudes, Weber’s, Euler and Mach numbers. Distorted river models and undistorted models, proper choice of scale ratios. Scale effect. Principle of dimensional analysis Rayleigh method, Buckingham theorem.
3 Turbulent flow, Reynolds equations, Prandtl’s mixing length theory, Equations of velocity distribution and friction coefficientBoundary Layer Theory: Concept of boundary layer, laminar and turbulent boundary layers, boundary layer thickness, von Karman integral equation, laminar sub-layer, hydro-dynamically smooth and rough boundaries, separation of flow and its control, cavitation.
4 Open channel Flow Uniform, Non-Uniform and variable flow. Resistance equations of Chezy and Manning. Section factor for uniform flow. Most Efficient rectangular, triangular and trapezoidal sections. Velocity distribution in open channels.
5 Gradually varied flow in Prismatic channels. Specific energy of flow. Critical depth in prismatic channels. Alternate depths. Rapid, critical and sub critical Flow Mild, steep and Critical Slopes. Classification of surface curves in prismatic channels and elementary computation
6 Rapidly varied flow: Hydraulic jump or standing wave in rectangular channels. Conjugate or sequent depths Losses in jump, location of jump. velocity distribution in open channels. Energy correction factor. Moment correction factor
7 Impact of free Jets: Impact of a jet on a flat or a curved vane, moving and stationary vane.Introduction of Hydraulic machine – Type of pumps and turbine and its brief description. Draft tube and its principle
8 Hydrology: Definition, Hydrologic cycle, Application to Engineering problems, measurement ofrainfall, rain gauge, peak flow, flood frequency method, catchment area formulae, Floodhydrograph, Rainfall analysis, Infiltration, Run off, Unit hydrograph and its determination,Estimation of run off.
9 Ground Water: Aquifers and its types, Confined and unconfined aquifer, Darcy’s Law, hydraulic conductivity, transmissivity, well hydraulics.
10 Canal Hydraulics: Types of canals, parts of canal irrigation system, channel alignment,assessment of water requirements, estimation of channel losses, design of channels, regime andsemi theoretical approaches (Kennedy’s Theory, Lacey’s Theory), cross section of channels, siltcontrol in canals.

Building Planning

SN CONTENTS
1 Introduction: to scope, objective and outcome of subject
2 Introduction: Types of buildings, criteria for location and site selection, site plan and its detail.
3 Sun Consideration : Different methods of drawing sun chart, sun shading devices, design of louvers.
4 Climatic and comfort Consideration: Elements of climate, global climate, climatic zones of India, thermal comfort, biclimatic chart,
5 Orientation: Meaning, factors affecting orientation, orientation criteria for tropical climate.
6 Building Bye Laws and NBC Regulations: Objective of by-laws, regulation regarding; means of access, lines of building frontages, covered area, floor area ratio, open spaces around buildings, height & sizes of rooms, plinth regulation.
7 Principles of Planning: Different factors affecting planning viz-aspect, prospect, furniture requirement,roominess, grouping, circulation, elegance, privacy etc.
8 Vastu Shastra In Modern Building planning: Factors considered in Vastu, site selection, orientation,planning and design of residential buildings, school/hospital
9 Functional Design And Accommodation Requirements Of Non Residential Buildings: viz-school buildings, rest house, primary health centers, post office etc.
10 Services in Buildings(A) Lighting and ventilation, doors and windows, lifts.

(B) Acoustics, sound insulation and noise control.

(C) Fire fighting provisions

Concrete Technology

SN CONTENTS
1 Introduction: to objective, scope and outcome of the subject
2 Ingredients of concrete: Cement: hydration of cement and its basic compounds, structure of hydrated cement, C-S-H gel, heat of hydration, gel-space ratio etc.
3 Aggregates: types, physical properties and standard methods for their determination, including Grading of aggregates as per IS. Manufactured sand- properties and IS Specifications for use in concrete.
4 Concrete: Grade of concrete, proportioning of ingredients, water content and its quality, water/cement ratio and its role, Properties of fresh concrete including workability, air content, Flow ability, Segregation, Bleeding and Viscosity etc. Factors affecting, methods of determination.
5 Properties of hardened concrete such as strengths, permeability, creep, shrinkage,factors influencing, Standard tests on fresh and hardened concrete as per IS code. Aggregate- cement interface, its effect on properties of concrete.
6 NDT: Introduction and their importance. Application & use of Rebound Hammer, Ultra-sonic pulse velocity meter, Rebar & Cover meter, half-cell potential meter, corrosion resistivity meter, core sampling. Interpretation of their results,
7 Concrete Handling in Field: Batching, mixing, placing and transportation of concrete, equipments for material handling, various methods their suitability and precautions. Compaction of concrete: methods &equipments. Curing of concrete: various methods their suitability.
8 Durability of concrete. Causes of deterioration, Carbonation, Tests for durability assessment
9 Admixture in concrete: Chemical and mineral admixtures, their types and uses: accelerator, retarders, water-proofing, plasticisers, super plasticizers-types, their suitability. Fly ash-properties for use in concrete, specifications of flyash as per IS 3812, and effect on properties of concrete. GGBFS, Microsilica and metakaolin- propertie, specifications and utility in concrete.
10 Concrete mix deign (IS method)- with and without water reducing admixtures
11 Form work: Requirements, their types. Typical formworks and shuttering/centering for Columns, beams, slabs, walls, etc. Slip and moving formwork.
12 Special types of concrete: Sulphate resisting concrete, under water concreting, pumpable concrete: methods and issues in making, salient properties and applications.
13 Concretes with tailored properties- including high performance concrete, with specific properties in fresh and hardened states, self-compacting concrete-materials, mix proportioning, test methods, use and applications with case studies.

Material Testing Lab

Experiments

  1. Tests on Mild steel and HYSD Bar –To determine compressive and tensile strength, yield strength, percentage elongation
  2. Tests on Cement and concrete cubes/ core to establish their strength
  3. Hardness Test – Rockwell Hardness and Brinell Hardness
  4. Impact Test – Izod and Charpy
  5. Modulus of Rupture of Wooden Beam
  6. Fatigue Test
  7. Spring Test
  8. Torsion Test

Hydraulics Engineering Lab

Experiments

  1. To determine the minor
  2. To determine the friction
  3. To determine Cd of Broad crested weir.
  4. To verify the momentum
  5. To determine the discharge of
  6. To determine Manning’s & Chezy’s coefficient of roughness for the bed of a given Channel.
  7. To study and plot characteristics curve of hydraulic
  8. To study velocity distribution in open channel

Building Drawing

Experiments

  • To plan and draw working drawing of a Residential building with following
    • Site plan
    • Foundation plan
    • Plan
    • Two sectional elevations
    • Front elevation
    • Furniture plan
    • Water supply and sanitary plan
    • Electric fitting plan
  • To design and draw a Primary Health Center 3- To design and draw a Primary School

4- To design and draw a Rest House 5- To design and draw a Post Office 6- To design and draw a Bank

  • To design and draw a College Library 8- To design and draw a Cinema Theatre

Advanced Surveying Lab

Experiments

  1. To measure the horizontal and vertical angles by
  2. To determine the Height of an object by trigonometric leveling (Instruments in same vertical plane).
  3. To determine the Height of an object by trigonometric leveling (Instruments in different vertical planes).
  4. Measurement of angles, length of survey line using Total Station, finding the coordinate of station
  5. To measure and adjust the angles of a braced
  6. To prepare the map of given area by plane
  7. Measurement of area of a traverse by Total Station

Concrete Lab

Experiments

  1. To determine the fineness of Cement by Blaine’s air permeability
  2. To determine the flexural strength of
  3. To determine Soundness of cement by Le-chatelier
  4. To determine the specific gravity of fine aggregate (sand) by
  5. To determine the bulking of fine aggregate and to draw curve between water content and
  6. Sieve analysis of coarse aggregates and fine
  7. To determine the workability of given concrete mix by slump
  8. To determine the optimum dose of super plastsizers by Flow table
  9. To design concrete mix of M-20 grade in accordance with I S
  10. To design concrete mix of M-40 grade with super plasticizer in accordance with I S 10262.
  11. To determine the Permeability of
  12. Study of Core cutter, UPV & Rebound Hammer

All Semester Syllabus for RTU Civil Engineering

You should have the following syllabus to boost your exam preparation for the RTU Civil Engineering.

Click on the link to access all semester syllabus related to Civil Engineering.

RTU Civil Engineering 4th Semester Marking Scheme

Here you can check the latest Civil Engineering 4th Semester Marking Scheme.

Civil Engineering 4th Semester Theory Marking Scheme

Course Marks
 

Title

 

Total

Advance Engineering Mathematics -II 100
Managerial Economics & Financial Accounting/ Technical

Communication

 

100

Basic Electronics for Civil Engineering

Applications

 

100

Strength of Materials 150
Hydraulics Engineering 150
Building Planning 100
Concrete Technology 150
Sub Total 850

Civil Engineering 4th Semester Practical & Sessional Marking Scheme

Material Testing Lab 50
Hydraulics Engineering

Lab

50
Building Drawing 75
Advanced Surveying

Lab

50
Concrete Lab 75
Social Outreach,

Discipline & Extra Curricular Activities

 

25

Sub- Total 325
TOTAL OF IV SEMEESTER 1175

Meaning Of various letters:

  • L: Lecture, T: Tutorial, P: Practical, Cr: Credits ETE: End Term Exam, IA: Internal Assessment

We have covered the complete guide on RTU Syllabus Civil Engineering 4th Semester 2020. feel free to ask us any questions in the comment section below

Leave a Comment