RTU Syllabus Electrical Engineering 5th Semester: You should know of the latest Electrical Engineering Syllabus and marking scheme to boost your preparation for the fifth-semester exam. With the latest RTU Syllabus, Electrical Engineering 5th Semester students get to know the important chapters and concepts to be covered in all subjects.
In the depth knowledge in every topic of RTU Syllabus Electrical Engineering 5th Semester will also helpful to crack the various competitive exams like Gate, IES.
Here we are providing you the complete guide on RTU Syllabus Electrical Engineering 5th Semester 2020-21 and Marking Scheme.
RTU Syllabus Electrical Engineering 5th Semester 2020-21
With the latest Electrical Engineering Syllabus for the 5th Semester, you can create a solid study plan and score a better mark in all subjects in the semester exam.
You must have Electrical 5th Semester books & study materials, Previous years questions paper along with the latest Electrical 5th sem Syllabus to enhance your semester exam preparation,
Before starting the complete guide on RTU Syllabus Electrical Engineering 5th Semester 2020-21, let’s check the highlights of RTU from the table below.
RTU Kota Highlights:
| Establishment | 2006 |
| Formation | Govt. of Rajasthan |
| Type of University | State |
| Approvals | UGC |
| Admission through: | Merit-Based |
| Affiliations | AICTE |
| University Location | Rajasthan Technical University, Rawathbhata Road Kota-324010, Rajasthan, India. |
Check the latest syllabus for RTU Electrical Engineering 5th sem from below.
Electrical Materials
| SN | CONTENTS |
| 1. | Introduction: Objective, scope and outcome of the course. |
| 2. | Elementary Materials Science Concepts
Bonding and types of solids, Crystalline state and their defects, Clas- sical theory of electrical and thermal conduction in solids, tempera- ture dependence of resistivity, skin effect, Hall effect.. |
| 3. | Dielectric Properties of Insulators in Static and Alternating field: Dielectric constant of mono-atomic gases, poly-atomic molecules and solids, Internal field in solids and liquids, Properties of Ferro-Electric materials, Polarization, Piezoelectricity, Frequency dependence of Electronic and Ionic Polarizability, Complex dielectric constant of non-dipolar solids, dielectric losses. |
| 4 | Magnetic Properties and Superconductivity
Magnetization of matter, Magnetic Material Classification, Ferromag- netic Origin, Curie-Weiss Law, Soft and Hard Magnetic Materials, Superconductivity and its origin, Zero resistance and Meissner Ef- fect, critical current density. |
| 5 | Conductivity of metals
Ohm’s law and relaxation time of electrons, collision time and mean free path, electron scattering and resistivity of metals. |
| 6. | Semiconductor Materials:
Classification of semiconductors, semiconductor conductivity, tem- perature dependence, Carrier density and energy gap, Trends in ma-terials used in Electrical Equipment. |
Power System – I
| SN | CONTENTS |
| 1 | Introduction: Objective, scope and outcome of the course. |
| 2 | Basic Concepts
Evolution of Power Systems and Present-Day Scenario. Structure of a power system: Bulk Power Grids and Micro-grids. Generation: Conventional and Renewable Energy Sources. Distributed Energy Resources. Energy Storage. Transmission and Distribution Systems: Line dia- grams, transmission and distribution voltage levels and topologies (meshed and radial systems). Synchronous Grids and Asynchronous (DC) interconnections. Review of Three-phase systems. Analysis of- simple three-phase circuits. Power Transfer in AC circuits and Reac- tive Power. |
| 3 | Power System Components:
Overhead Transmission Lines and Cables: Electrical and Magnetic Fields around conductors, Corona. Parameters of lines and cables. Capacitance and Inductance calculations for simple configurations. Travelling-wave Equations. Sinusoidal Steady state representation of Lines: Short, medium and long lines. Power Transfer, Voltage profile and Reactive Power. Characteristics of transmission lines. Surge Im- pedance Loading. Series and Shunt Compensation of transmission lines. Transformers: Three-phase connections and Phase-shifts. Three- winding transformers, autotransformers, Neutral Grounding trans- formers. Tap-Changing in transformers. Transformer Parameters. Single phase equivalent of three-phase transformers. Synchronous Machines: Steady-state performance characteristics. Operation when connected to infinite bus. Real and Reactive Power Capability Curve of generators. Typical waveform under balanced ter- minal short circuit conditions – steady state, transient and sub- transient equivalent circuits. Loads: Types, Voltage and Frequency Dependence of Loads. Per-unit System and per-unit calculations. |
| 4 | Over-voltages and Insulation Requirements
Generation of Over-voltages: Lightning and Switching Surges. Protec- tion against Overvoltages, Insulation Coordination. Propagation of Surges. Voltages produced by traveling surges. Bewley Diagrams. |
| 5 | Fault Analysis and Protection Systems
Method of Symmetrical Components (positive, negative and zero se- quences). Balanced and Unbalanced Faults. Representation of genera- tors, lines and transformers in sequence networks. Computation of Fault Currents. Neutral Grounding. Switchgear: Types of Circuit Breakers. Attributes of Protection schemes, Back-up Protection. Protection schemes (Over-current, di- rectional, distance protection, differential protection) and their appli- cation. |
| 6 | Introduction to DC Transmission & Renewable Energy Systems DC Transmission Systems: Line-Commutated Converters (LCC) and Voltage Source Converters (VSC). LCC and VSC based dc link, Real Power Flow control in a dc link. Comparison of ac and dc transmis- sion. Solar PV systems: I-V and P-V characteristics of PV panels, pow- er electronic interface of PV to the grid. Wind Energy Systems: Power curve of wind turbine. Fixed and variable speed turbines. Permanent Magnetic Synchronous Generators and Induction Generators. Power Electronics interfaces of wind generators to the grid |
Control System
| SN | CONTENTS |
| 1 | Introduction: Objective, scope and outcome of the course. |
| 2 | Introduction to control problem
Industrial Control examples. Mathematical models of physical sys- tems. Control hardware and their models. Transfer function models of linear time-invariant systems. Feedback Control: Open-Loop and Closed-loop systems. Benefits of Feedback. Block diagram algebra |
| 3 | Time Response Analysis:
Standard test signals. Time response of first and second order sys- tems for standard test inputs. Application of initial and final value theorem. Design specifications for second-order systems based on the time-response. Concept of Stability. Routh-Hurwitz Criteria. Relative Stability analy- sis. Root-Locus technique. Construction of Root-loci. |
| 4 | Frequency-response analysis
Relationship between time and frequency response, Polar plots, Bode plots. Nyquist stability criterion. Relative stability using Nyquist crite- rion – gain and phase margin. Closed-loop frequency response. |
| 5 | Introduction to Controller Design
Stability, steady-state accuracy, transient accuracy, disturbance re- jection, insensitivity and robustness of control systems. Root-loci method of feedback controller design. Design specifications in frequency-domain. Frequency-domain me- thods of design. Application of Proportional, Integral and Derivative Controllers, Lead and Lag compensation in designs. Analog and Digital implementation of controllers |
| 6 | State variable Analysis
Concepts of state variables. State space model. Diagonalization of State Matrix. Solution of state equations. Eigenvalues and Stability Analysis. Concept of controllability and observability. Pole-placement by state feedback. Discrete-time systems. Difference Equations. State-space models of linear discrete-time systems. Stability of linear discrete-time systems |
| 7 | Introduction to Optimal Control and Nonlinear Control Performance Indices. Regulator problem, Tracking Problem. Nonlinear system–Basic concepts and analysis |
Microprocessor
| SN | CONTENTS |
| 1 | Introduction: Objective, scope and outcome of the course. |
| 2 | Fundamentals of Microprocessors
Fundamentals of Microprocessor Architecture. 8-bitMicroprocessor and Microcontroller architecture, Comparison of 8-bit microcontrollers, 16-bit and 32-bit microcontrollers. Definition of embedded system and its characteris- tics, Role of microcontrollers in embedded Systems. Overview of the 8051 family. |
| 3 | The 8051 Architecture:
Internal Block Diagram, CPU, ALU, address, data and control bus, Working registers, SFRs, Clock and RESET circuits, Stack and Stack Pointer, Program Counter, I/O ports, Memory Structures, Data and Program Memory, Timing diagrams and Execution Cycles. |
| 4 | Instruction Set and Programming
Addressing modes: Introduction, Instruction syntax, Data types, Sub- routines Immediate addressing, Register addressing, Direct addressing, Indirect address- ing, Relative addressing, Indexed addressing, Bit inherent addressing, bit direct addressing. 8051 Instruction set, Instruction timings. Data transfer instructions, Arithmetic instruc- tions, Logical instructions, Branch instructions, Subroutine instructions, Bit manipulation in- struction. Assembly language programs, C language programs. Assemblers and compilers. Programming and debugging tools.. |
| 5 | Memory and I/O Interfacing
Memory and I/O expansion buses, control signals, memory wait states. Interfacing of peripheral devices such as General Purpose I/O, ADC, DAC, timers, counters, memory devices. |
| 6 | External Communication Interface
Synchronous and Asynchronous Communication. RS232, SPI, I2C. Introduction and interfacing to protocols like Blue-tooth and Zig-bee. |
| 7 | Applications
LED, LCD and keyboard interfacing. Stepper motor interfacing, DC Motor interfacing, sensor interfacing |
Electrical Machine Design
| SN | CONTENTS |
| 1 | Introduction: Objective, scope and outcome of the course. |
| 2 | Major Consideration for Design
Major considerations in electrical machine design, electrical engineer- ing materials, space factor, choice of specific electrical and magnetic loadings, thermal considerations, heat flow, temperature rise, rating of machines. |
| 3 | Transformers:
Sizing of a transformer, main dimensions, kVA output for single- and three-phase transformers, window space factor, overall dimensions, operating characteristics, regulation, no load current, temperature rise in transformers, design of cooling tank, methods for cooling of transformers |
| 4 | Induction Motors
Sizing of an induction motor, main dimensions, length of air gap, rules for selecting rotor slots of squirrel cage machines, design of ro- tor bars & slots, design of end rings, design of wound rotor, magnetic leakage calculations, leakage reactance of polyphase machines, magnetizing current, short circuit current, circle diagram, operating characteristics. |
| 5 | Synchronous Machines
Sizing of a synchronous machine, main dimensions, design of salient pole machines, short circuit ratio, shape of pole face, armature de- sign, armature parameters, estimation of air gap length, design of ro- tor, design of damper winding, determination of full load field mmf, design of field winding, design of turbo alternators, rotor design. |
| 6 | Computer aided Design (CAD):
Limitations (assumptions) of traditional designs, need for CAD analy- sis, synthesis and hybrid methods, design optimization methods, va- riables, constraints and objective function, problem formulation. In- troduction to FEM based machine design. Introduction to complex structures of modern machines-PMSMs, BLDCs, SRM and claw-pole machines. |
Restructured Power System
| SN | CONTENTS |
| 1 | Introduction : Objective, scope and outcome of the course. |
| 2 | Introduction to restructuring of power industry
Reasons for restructuring of power industry; Understanding the re- structuring process, Entities involved, The levels of competition, The market place mechanisms, Sector-wise major changes required; Reasons and objectives of deregulation of various power systems across the world |
| 3 | Fundamentals of Economics
Consumer and suppliers behavior, Total utility and marginal utility, Law of diminishing marginal utility, Elasticity of demand and supply curve, Market equilibrium, Consumer and supplier surplus, Global welfare, Deadweight loss |
| 4 | The Philosophy of Market Models
Monopoly model, Single buyer model, Wholesale competition model, Retail competition model, distinguishing features of electricity as a commodity, Four pillars of market design, Cournot, Bertrand and Stackelberg competition model |
| 5 | Transmission Congestion Management
Transfer capability, Importance of congestion management, Ef- fects of congestion, Classification of congestion management me- thods, ATC, TTC, TRM, CBM, ATC calculation using DC and AC model, Nodal pricing, Locational Marginal Prices (LMPs), Implications of nodal pricing, Price area congestion management Capacity allevia- tion methods, Re-dispatching, Counter-trade, Curtailment |
| 6 | Ancillary Service Management
Type and start capability service, Provisions of ancillary services, Markets for ancillary services, Co-optimization of energy and reserve services, Loss of opportunity cost, International practices of ancillary services. |
| 7 | Pricing of transmission network usage and Market power Introduction to transmission pricing, Principles of transmission pricing, Classification of transmission pricing, Rolled-in transmission pricing paradigm. Attributes of a perfectly competitive market, The firm’s supply decision under perfect competition, Imperfect competi- tion, Monopoly, Oligopoly. Effect of market power, Identifying market power, HHI Index, Entropy coefficient, Lerner index. |
Electromagnetic Wave
| SN | CONTENTS |
| 1 | Introduction: Objective, scope and outcome of the course. |
| 2 | Transmission Lines
Introduction, Concept of distributed elements, Equations of voltage and current, Standing waves and impedance transformation, Lossless and low-loss transmission lines, Power transfer on a transmission line, Analysis of transmission line in terms of admittances, Transmis- sion line calculations with the help of Smith chart, Applications of transmission line, Impedance matching using transmission lines. |
| 3 | Maxwell’s Equations
Basic quantities of Electromagnetics, Basic laws of Electromagnetics: Gauss’s law, Ampere’s Circuital law, Faraday’s law of Electromagnetic induction. Maxwell’s equations, Surfacecharge and surface current, Boundary conditions at media interface. |
| 4 | Uniform Plane Wave
Homogeneous unbound medium, Wave equation for time harmonic fields, Solution of the wave equation, Uniform plane wave, Wave pola- rization, Wave propagation in conducting medium, Phase velocity of a wave, Power flow and Poynting vector. |
| 5 | Plane Waves at Media Interface
Plane wave in arbitrary direction, Plane wave at dielectric interface, Reflection and refraction of waves at dielectric interface, Total internal reflection, Wave polarization at media interface, Brewster angle, Fields and power flow at media interface, Lossy media interface, Reflection from conducting boundary. |
| 6 | Waveguides
Parallel plane waveguide: Transverse Electric (TE) mode, transverse Magnetic(TM) mode, Cut-off frequency, Phase velocity and dispersion. Transverse Electromagnetic (TEM) mode, Analysis of waveguide- general approach, Rectangular waveguides. |
| 7 | Antennas
Radiation parameters of antenna, Potential functions, Solution for po- tential functions, Radiations from Hertz dipole, Near field, Far field, Total power ra- diated by a dipole, Radiation resistance and radiation pattern of Hertz dipole, Hertz di- pole in receiving mode. |
Digital Control System
| SN | CONTENTS |
| 1 | Introduction: Objective, scope and outcome of the course. |
| 2 | Discrete Representation of Continuous Systems
Basics of Digital Control Systems. Discrete representation of conti- nuous systems. Sample and hold circuit. Mathematical Modelling of sample and hold circuit. Effects of Sampling and Quantization. Choice of sampling frequency. ZOH equivalent. |
| 3 | Discrete System Analysis
Z-Transform and Inverse Z Transform for analyzing discrete time sys- tems. Pulse Transfer function. Pulse transfer function of closed loop systems. Mapping from s-plane to z plane. Solution of Discrete time systems. Time response of discrete time system. |
| 4 | Stability of Discrete Time System
Stability analysis by Jury test. Stability analysis using bilinear trans- formation. Design of digital control system with dead beat response. Practical issues with dead beat response design. |
| 5 | State Space Approach for discrete time systems
State space models of discrete systems, State space analysis. Lyapu- nov Stability. Controllability, reach-ability, Reconstructibility and ob- servability analysis. Effect of pole zero cancellation on the controllabil- ity & observability. |
| 6. | Design of Digital Control System
Design of Discrete PID Controller, Design of discrete state feedback controller. Design of set point tracker. Design of Discrete Observer for LTI System. Design of Discrete compensator. |
| 7 | Discrete output feedback control
Design of discrete output feedback control. Fast output sampling (FOS) and periodic output feedback controller design for discrete time systems |
Power System – I Lab
- Generating station design: Design considerations, basic schemes and single line dia- gram of hydro, thermal, nuclear and gas power plants. Electrical equipment for power stations.
- Distribution system Design: Design of feeders & distributors. Calculation of voltage drops in distributors. Calculation of conductor size using Kelvin’s
- Study of short term, medium term and long term load
- Sending end and receiving end power circle
- Substations: Types of substations, various bus–bar arrangements. Electrical equip- ment for
- Study high voltage testing of electrical equipment: line insulator, cable, bushing, pow- er capacitor, and power
- Design an EHV transmission line
- Study filtration and Treatment of transformer
- Determine dielectric strength of transformer
- Determine capacitance and dielectric loss of an insulating material using Schering bridge.
- Flash over voltage testing of
Control System Lab
- (a) Plot step response of a given TF and system in state-space. Take different values of damping ratio and wn natural undamped (b) Plot ramp response.
- To design 1st order R-C circuits and observe its response with the following inputs and trace the
- Step
- Ramp (c) Impulse
- To design 2nd order electrical network and study its transient response for step input and following
- Under damped system
- Over damped
- Critically damped
- To Study the frequency response of following compensating Networks, plot the graph and final out corner
- Leg Network
- Lead (c) Leg-lead Network.
- Draw the bode plot in real time for a Non-Inverting
- Draw the bode plot in real time for an Inverting
- Draw the bode plot for second order transfer
- Draw the bode plot for first order transfer
- Design and analyse Tow- Thomas biquad
- Design and calculate Kp, Ki for PI
- Design PID controller and also calculate Kp, Ki, Kd for
Microprocessor Lab
- Program to perform integer division: (1) 8-bit by 8-bit (2) 16-bit by 8-bit.Study the hardware, functions, memory structure and operation of 8085- Microprocessor
- Transfer of a block of data in memory to another place in memory
- Transfer of black to another location in reverse
- Searching a number in an
- Sorting of array in: (1) Ascending order (2) Descending
- Finding party of a 32-bit
- Program to perform following conversion (1) BCD to ASCII (2) BCD to
- Program to multiply two 8–bit numbers
- Program to generate and sum 15 Fibonacci
- Program for rolling display of message “India”, “HELLO”.
- To insert a number at correct place in a sorted
- Reversing bits of an 8-bit
- Fabrication of 8-bit LED interfaces for 8085 kit through 8155 and
- Data transfer on output port 8155 & 8255 & implementation of disco light, running light, and sequential lights on the above mentioned
- Parallel data transfer between two DYNA-85 kit using 8253
- Generation of different waveform on 8253/8254 programmable
System Programming Lab
- Write a MATLAB program for designingBasics of MATLAB matrices and vectors, matrix and array operations, Saving and load- ing data, plotting simple graphs, scripts and functions, Script files, Function files, Global Variables, Loops, Branches, Control flow, Advanced data objects, Multi- dimensional matrices, Structures, Applications in linear algebra curve fitting and inter- polation. Numerical integration, Ordinary differential equation. (All contents is to be covered with tutorial sheets)
- Idea about simulink, problems based on simulink. (All contents is to be covered with tutorial sheets)
- Write a program to generate Machine Op- code table using two pass
- Single Phase Full Wave Diode Bridge Rectifier With LC Filter
- Simulate Three phase Half wave diode rectifier with RL
- Starting Of A 5 HP 240V DC Motor With A Three-Step Resistance
- Simulate OC/SC test of 1-phase
- Simulate Torque- speed characteristics of induction
All Semester Syllabus for RTU Electrical Engineering
You should have the following syllabus to boost your exam preparation for the RTU Electrical Engineering.
Click on the link to access all semester syllabus related to Electrical Engineering.
- 3rd Semester Electrical Syllabus & Marking Scheme
- 4th Semester Electrical Syllabus & Marking Scheme
- 6th Semester Electrical Syllabus & Marking Scheme
- 7th Semester Electrical Syllabus & Marking Scheme
- 8th Semester Electrical Syllabus & Marking Scheme
RTU Electrical Engineering 5th Semester Marking Scheme
Here you can check the latest Electrical Engineering 5th Semester Marking Scheme.
|
Electrical Engineering 5th Semester Theory Marking Scheme |
|
| Subject Title | Marks |
| Electrical Materials | 100 |
| Power System – I | 150 |
| Control System | 150 |
| Microprocessor | 150 |
| Electrical Machine Design | 150 |
| Professional Elective I (any one):
Restructured Power System Electromagnetic Wave Digital Control System |
100 |
| Sub Total | 800 |
|
Electrical Engineering 5th Semester Practical & Sessional Marking Scheme |
|
| Power System – I Lab | 50 |
| Control System Lab | 50 |
| Microprocessor Lab | 50 |
| System Programming Lab | 50 |
| Industrial Training | 125 |
| Social Outreach,
Discipline & Extra Curricular Activities |
25 |
| Sub- Total | 350 |
| TOTAL OF V SEMESTER | 1150 |
Meaning Of various letters:
- L: Lecture, T: Tutorial, P: Practical, Cr: Credits ETE: End Term Exam, IA: Internal Assessment
We have covered the complete guide on RTU Syllabus Electrical Engineering 5th Semester 2020-21. feel free to ask us any questions in the comment section below